Natural and wastewater treatment
Since 1989
professional solutions
for natural and waste
water treatment

Industrial grease trap

Общие данные

Industrial grease trap (grease catcher)

The UKOS-PROM-ON grease trap is designed for preliminary treatment of sewage from fat and suspended matter. The installation consists of a sedimentation tank for extracting suspended matter and an impurity separator tray of density less than the density of water placed in the common housing. The housing features partitions and nozzles designed to organize the flow of the liquid to be cleaned, fats, oils and sediment. In the upper part of the housing there are pockets intended for concentration and removal of trapped floating organic impurities.

The main technological equipment and software of the industrial grease-catcher are of Russian origin.

The device can be completed with a collection container for trapped organic impurities and a set of automatics that allows the equipment to operate in a fully automated mode without the presence of personnel. With the appropriate additional equipment, it is possible to treat any volumes of emergency discharges of fats and oils followed by their subsequent disposal.

Application range

Using the grease trap to treat wastewater from a food company makes it possible to solve the following tasks:

  • preliminary wastewater purification from fat
  • prevention of accidents caused by the ingress of significant amounts of fat and oils into the sewage system
  • signaling on the need to clean the plant or on emergency due to volley fat discharge

The UKOS-PROM-ON industrial grease trap may be installed downstream of production workshops, upstream of the accumulating wastewater-averager or on the premises of wastewater treatment plants.

Комплект поставки

В основной комплект поставки входят:

  • the UKOS-PROM-ON installation
  • passport
  • operations manual

Исполнение

The equipment is manufactured of carbon or stainless steel as well as polypropylene or polyethylene. The unit is available with manual or automatic control with controller automatics and dispatching function for data transfer to the central control panel or the operator's mobile phone. Delivery is also available in a turnkey container version as a ready-made unit-module.

Условия поставки

Срок поставки: 1-3 месяца (в зависимости от типоразмера оборудования, загруженности производства, сроков поставки комплектующих).

Транспортировка: by automobile or rail.

Складирование оборудования: in heated premises.

Гарантия

Стандартный гарантийный срок составляет 12 месяцев со дня приёмки оборудования в эксплуатацию. Возможно увеличение срока гарантии за дополнительную плату.

Исходные требования

Установку допускается применять при следующих исходных данных:

  • concentration maximum*, mg/l:
    • suspended matter - 1500
    • petroleum products - 1000
    • BOD20 – 100
    • COD - 250
    • other specific impurities (including heavy metals, phenols, pesticides), for each substance - 1

* Provided the unit is properly equipped, it is capable of receiving emergency discharges of oil products of any concentration.

Габаритный чертёж

Technical specifications

# Indicator Value
1. Rated capacity, m3/hr 1 5 10
2. Concentration in purified water, maximum, mg/l:
- suspended matter 200
- petroleum products 30
3. Outer dimensions, mm
- Length (L) 1 300 2 200 2 200
- Width (W) 1 250 2 630 5 260
- Height (H) 1 500 3 130 3 130
4. Mass/operating mass, kg 1 000 / 3 000 1 470 / 7 300 2 940 / 14 600
5. Purification efficiency (in dependence of initial concentrations):
- suspended matter 60-80%
- petroleum products 60-90%
6. Operation mode continuous

Note: all information presented in this prospectus is meant for guidance only and can be specified when designing or ordering the equipment. Also, the company reserves its right to make changes and upgrade the presented equipment.