Общие данные
The UKOS-AUTO compact block-modular water treatment complex (BMWC), designed to treat sewage from car washes enables creating circulating water supply systems at car washing sites (without discharging the wastes into the sewage system). The plant uses modern technologies of electrochemical cleaning and filtration that require no reagents, as well as technical solutions that improve the efficiency and reliability of the equipment significantly.
Wastewater treatment plants for car washes based on the UKOS-AUTO equipment do not require any constant presence of maintenance personnel, are characterized by low energy consumption, and may be deployed on the premises of the washing area.
Application range
The installation can be used:
- for sewage treatment of passenger cars and trucks
- at the stations of technical and service maintenance
- as part of treatment facilities for car washing at motor transport enterprises
- for cleaning sewage from washing of rolling stock of railway and underground transport
- for treating wastewater generated when washing other equipment, units and assemblies
- to build systems of recycled water supply in the areas of washing
Комплект поставки
В основной комплект поставки входят:
- the UKOS-AUTO installation of the required capacity with automatic control panel
- rectifier
- sewage pump for cleaning
Delivered to order as extras:
- car washing equipment
- additional tank for purified water
- swap pump
- other components for washing areas.
Исполнение
The UKOS-AUTO units are manufactured of ferrous metal, plastic or stainless steel.
Условия поставки
Срок поставки: 1-3 месяца (в зависимости от типоразмера оборудования, загруженности производства, сроков поставки комплектующих).
Транспортировка: by any transportation means available (truck or rail are preferable).
Складирование оборудования: under canopy, or in the open during summer season.
Гарантия
Стандартный гарантийный срок составляет 12 месяцев со дня приёмки оборудования в эксплуатацию. Возможно увеличение срока гарантии за дополнительную плату.
Исходные требования
Установку допускается применять при следующих исходных данных:
Технические характеристики
# | Indicator | Complex modification | |||||
---|---|---|---|---|---|---|---|
UKOS-AUTO | |||||||
1. | Capacity, m3/hr | 0.3 - 0.32 | 0.5 - 0.55 | 1.0 - 1.1 | 2.0 - 2.5 | 5.0 - 5.5 | 10.0 - 11.0 |
2. | Operation time to electrodes change, months | 6 - 12 | |||||
3. | Concentration in purified water, mg/l: | ||||||
- suspended matter | 1.0 - 5.0 | ||||||
- petroleum products | 0.5 - 3.0 | ||||||
4. | Outer dimensions, mm: | ||||||
- Length (L) | 1 200 | 1 400 | 1 800 | 2 000 | 4 400 | 5 100 | |
- Width (W) | 500 | 600 | 900 | 1 300 | 1 300 | 2 400 | |
- Height (H) | 2 100 | 2 100 | 2 100 | 2 400 | 2 400 | 2 400 | |
5. | Weight, t: | ||||||
- dry | 0.4 (0.2) | 0.5 (0.25) | 0.8 (0.4) | 1.2 (0.6) | 2.3 (1.2) | 3.2 (2.1) | |
- water filled | 1.2 (1.0) | 1.5 (1.25) | 3.1 (2.7) | 5.5 (4.9) | 10.7 (9.4) | 20.0 (18.9) | |
6. | Installed power, maximum, kW | 0.6 | 0.9 | 1.1 | 1.6 | 3.3 | 5.7 |
7. | Filtering cycle duration, hr | 10 | |||||
8. | Operation mode | continuous or periodic |