Natural and wastewater treatment
Since 1989
professional solutions
for natural and waste
water treatment

Oil and petroleum products spill response

Общие данные

Oil and petroleum products spill response: localization of emergency spills, elimination of consequences

The compact UKOS-PROM-ON unit is designed for localization and liquidation of oil and petroleum products' spills, as well as elimination of spillages. The installation consists of a sedimentation tank for removing suspended solids and a tray for separating impurities of a density less than the density of water arranged in a common housing. The housing features partitions and branch nozzles, designed to organize the flow of the liquid to be cleaned, petroleum products and sediments. In the upper part of the body there are oil collection pockets intended for concentration and removal of trapped products of oil origin. The main technological equipment and software of the separator of oily waters are of Russian origin.

The device can be completed with a collection tank and a set of automatics that allows localizing oil spills in a fully automated mode without the presence of personnel.

Application range

The unit is used for eliminating spills of petroleum products and preventing accidents in sewerage systems. The equipment may be installed at workshop outlets, upstream of wastewater storage tanks or in the premises of wastewater treatment facilities.

Комплект поставки

В основной комплект поставки входят:

  • the UKOS-PROM-ON installation
  • passport
  • operations manual


The equipment is manufactured of carbon or stainless steel as well as polypropylene or polyethylene. The unit is available with manual or automatic control with controller automatics and dispatching function for data transfer to the central control panel or the operator's mobile phone. Delivery is also available in a turnkey container version as a ready-made unit-module.

Условия поставки

Срок поставки: 1-3 месяца (в зависимости от типоразмера оборудования, загруженности производства, сроков поставки комплектующих).

Транспортировка: by automobile or rail.

Складирование оборудования: in heated premises.


Стандартный гарантийный срок составляет 12 месяцев со дня приёмки оборудования в эксплуатацию. Возможно увеличение срока гарантии за дополнительную плату.

Исходные требования

Установку допускается применять при следующих исходных данных:

  • concentration maximum*, mg/l:
    • suspended matter - 1500
    • petroleum products - 1000
    • BOD20 – 100
    • COD - 250
    • other specific impurities (including heavy metals, phenols, pesticides), for each substance - 1

* Provided the unit is properly equipped, it is capable of receiving emergency discharges of oil products of any concentration.

Габаритный чертёж

Technical specifications

# Indicator Value
1. Rated capacity, m3/hr 1 5 10
2. Concentration in purified water, maximum, mg/l:
- suspended matter 200
- petroleum products 30
3. Outer dimensions, mm
- Length (L) 1 300 2 200 2 200
- Width (W) 1 250 2 630 5 260
- Height (H) 1 500 3 130 3 130
4. Mass/operating mass, kg 1 000 / 3 000 1 470 / 7 300 2 940 / 14 600
5. Purification efficiency (in dependence of initial concentrations):
- suspended matter 60-80%
- petroleum products 60-90%
6. Operation mode continuous

Note: all information presented in this prospectus is meant for guidance only and can be specified when designing or ordering the equipment. Also, the company reserves its right to make changes and upgrade the presented equipment.