Общие данные
Oily water separator UKOS-PROM-ON is designed for preliminary cleaning of sewage from oil products and suspended solids. The installation consists of a sedimentation tank for removing suspended solids and a tray for separating impurities of a density less than the density of water arranged in a common housing. The housing features partitions and branch nozzles, designed to organize the flow of the liquid to be cleaned, petroleum products and sediments. In the upper part of the body there are oil collection pockets intended for concentration and removal of trapped products of oil origin. The main technological equipment and software of the separator of oily waters are of Russian origin.
The facility may be completed with a collection container and a set of automatics enabling the equipment to operate in fully automated mode without the presence of personnel.
Application range
The unit is used for preliminary cleaning of oily wastewater and prevention of accidents in the sewage system associated with the ingress of significant amounts of petroleum products. Separators of oily waters can be installed at workshop outlets, upstream of wastewater storage tanks or in the premises of water treatment facilities.
Комплект поставки
В основной комплект поставки входят:
- the UKOS-PROM-ON installation
- passport
- operations manual
Исполнение
The equipment is manufactured of carbon or stainless steel as well as polypropylene or polyethylene. The unit is available with manual or automatic control with controller automatics and dispatching function for data transfer to the central control panel or the operator's mobile phone. Delivery is also available in a turnkey container version as a ready-made unit-module.
Условия поставки
Срок поставки: 1-3 месяца (в зависимости от типоразмера оборудования, загруженности производства, сроков поставки комплектующих).
Транспортировка: by automobile or rail.
Складирование оборудования: in heated premises.
Гарантия
Стандартный гарантийный срок составляет 12 месяцев со дня приёмки оборудования в эксплуатацию. Возможно увеличение срока гарантии за дополнительную плату.
Исходные требования
Установку допускается применять при следующих исходных данных:
- concentration maximum*, mg/l:
- suspended matter - 1500
- petroleum products - 1000
- BOD20 – 100
- COD - 250
- other specific impurities (including heavy metals, phenols, pesticides), for each substance - 1
* Provided the unit is properly equipped, it is capable of receiving emergency discharges of oil products of any concentration.
Габаритный чертёж
Technical specifications
# | Indicator | Value | ||
---|---|---|---|---|
1. | Rated capacity, m3/hr | 1 | 5 | 10 |
2. | Concentration in purified water, maximum, mg/l: | |||
- suspended matter | 200 | |||
- petroleum products | 30 | |||
3. | Outer dimensions, mm | |||
- Length (L) | 1 300 | 2 200 | 2 200 | |
- Width (W) | 1 250 | 2 630 | 5 260 | |
- Height (H) | 1 500 | 3 130 | 3 130 | |
4. | Mass/operating mass, kg | 1 000 / 3 000 | 1 470 / 7 300 | 2 940 / 14 600 |
5. | Purification efficiency (in dependence of initial concentrations): | |||
- suspended matter | 60-80% | |||
- petroleum products | 60-90% | |||
6. | Operation mode | continuous |
Note: all information presented in this prospectus is meant for guidance only and can be specified when designing or ordering the equipment. Also, the company reserves its right to make changes and upgrade the presented equipment.